BASIS OF BOUQUET.

Pre-need to decide how many "colors" of flowers and additional material nadopodgotovit for the manufacture and installation of a bouquet to the selected container.

		1) Get the Oasis and the capacity for a bouquet.
		2) Cut out the "Oasis" piece slightly wider than the tank shape, but lower in height and tightly into the container.
		3) Get prepared with "flowers" and other supporting material.
		4) Insert the auxiliary material in the "Oasis" on the perimeter of the tank with a slight slope to the edge.
		5) Insert the "Oasis" "flowers".

POSSIBLE CONFIGURATIONS bouquet.

		1) Can "flowers" to set evenly in a circle so that the bouquet look the same on all sides, then there was symmetrical about its center.
		2) You can install as "flowers" that the bouquet will be the most impressive look to just one side, the front, but it will be symmetrical about an axis, dividing it into right and left sides.
		3) Perhaps the asymmetrical arrangement of "flowers" in the bouquet, which has a front side.

Gift wrapping of sweets.

First, cut out of cardboard bedplate (it can be pasted colored paper) of sufficient magnitude.Then cut from the roll of wrapping paper transparent rectangle whose width is equal to two heights of the bouquet, and length - the perimeter of the bottom of plus 10 mm.

		1) Get a transparent sheet of wrapping paper and bedplate.
		2) wrap the bottom of a paper.
		3) Glue the paper to the bottom of a large scotch.
		4) Set the bouquet in the package.
		5) wrap packing tape, making a beautiful bow.
		6) Photo packaged bouquet.